Freeze sur les SSDs de l'asso

Dans ce forum, vous pouvez discuter des pannes et problèmes sur vos matériels
Répondre
Avatar de l’utilisateur
Otyugh
Messages : 144
Inscription : 28 déc. 2024 18:35
Contact :
Contacter Otyugh

Freeze sur les SSDs de l'asso

Message par Otyugh »

Yop,
à investiguer mais j'ai des ralentissement réguliers (des freeze de ~20-40s) et ça vient apparemment du SSD (qui n'a aucune sourcis dans les stats SMART) qui spamme dmesg.

Modèle : Crucial BX500 240GB 3D NAND SATA 2.5-inch SSD

Code : Tout sélectionner

[ 7927.082054] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 7927.082074] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 7927.082088] ata4.00: failed command: DATA SET MANAGEMENT
[ 7927.082093] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 24 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 7927.082110] ata4.00: status: { DRDY }
[ 7927.082119] ata4: hard resetting link
[ 7927.350096] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7927.395370] ata4.00: configured for UDMA/133
[ 7927.399334] ata4: EH complete
[ 7961.907444] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 7961.907461] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 7961.907470] ata4.00: failed command: DATA SET MANAGEMENT
[ 7961.907475] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 10 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 7961.907491] ata4.00: status: { DRDY }
[ 7961.907501] ata4: hard resetting link
[ 7962.175452] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7962.220721] ata4.00: configured for UDMA/133
[ 7962.224692] ata4: EH complete
[ 8000.817027] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8000.817047] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8000.817059] ata4.00: failed command: DATA SET MANAGEMENT
[ 8000.817066] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 7 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8000.817086] ata4.00: status: { DRDY }
[ 8000.817099] ata4: hard resetting link
[ 8001.084963] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8001.130238] ata4.00: configured for UDMA/133
[ 8001.134153] ata4: EH complete
[ 8033.594259] ata4.00: NCQ disabled due to excessive errors
[ 8033.594271] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8033.594282] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8033.594291] ata4.00: failed command: DATA SET MANAGEMENT
[ 8033.594295] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 7 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8033.594311] ata4.00: status: { DRDY }
[ 8033.594322] ata4: hard resetting link
[ 8033.862237] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8033.907481] ata4.00: configured for UDMA/133
[ 8033.911443] ata4: EH complete
[ 8068.403586] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8068.403623] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8068.403641] ata4.00: failed command: DATA SET MANAGEMENT
[ 8068.403653] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 14 dma 512 out
                        res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8068.403685] ata4.00: status: { DRDY }
[ 8068.403701] ata4: hard resetting link
[ 8068.671591] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8068.716831] ata4.00: configured for UDMA/133
[ 8068.720801] ata4: EH complete
[ 8103.216939] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8103.216977] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8103.216993] ata4.00: failed command: DATA SET MANAGEMENT
[ 8103.217005] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 1 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8103.217038] ata4.00: status: { DRDY }
[ 8103.217055] ata4: hard resetting link
[ 8103.484946] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8103.530192] ata4.00: configured for UDMA/133
[ 8103.534162] ata4: EH complete
[ 8135.994276] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8135.994312] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8135.994330] ata4.00: failed command: DATA SET MANAGEMENT
[ 8135.994343] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 14 dma 512 out
                        res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8135.994374] ata4.00: status: { DRDY }
[ 8135.994391] ata4: hard resetting link
[ 8136.262215] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8136.307387] ata4.00: configured for UDMA/133
[ 8136.311426] ata4: EH complete
[ 8168.763549] ata4: limiting SATA link speed to 3.0 Gbps
[ 8168.763561] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8168.763590] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8168.763607] ata4.00: failed command: DATA SET MANAGEMENT
[ 8168.763619] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 16 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8168.763659] ata4.00: status: { DRDY }
[ 8168.763678] ata4: hard resetting link
[ 8169.031497] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 8169.076734] ata4.00: configured for UDMA/133
[ 8169.080713] ata4: EH complete
[ 8199.484743] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8199.484779] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8199.484796] ata4.00: failed command: DATA SET MANAGEMENT
[ 8199.484808] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 2 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8199.484843] ata4.00: status: { DRDY }
[ 8199.484861] ata4: hard resetting link
[ 8199.752686] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 8199.797924] ata4.00: configured for UDMA/133
[ 8199.801896] ata4: EH complete
[ 8230.209859] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8230.209900] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8230.209918] ata4.00: failed command: DATA SET MANAGEMENT
[ 8230.209930] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 16 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8230.209962] ata4.00: status: { DRDY }
[ 8230.209978] ata4: hard resetting link
[ 8230.477879] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 8230.523114] ata4.00: configured for UDMA/133
[ 8230.527086] ata4: EH complete
[ 8260.927064] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8260.927100] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8260.927116] ata4.00: failed command: DATA SET MANAGEMENT
[ 8260.927128] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 1 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8260.927160] ata4.00: status: { DRDY }
[ 8260.927177] ata4: hard resetting link
[ 8261.195076] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 8261.240366] ata4.00: configured for UDMA/133
[ 8261.244333] ata4: EH complete
[ 8291.640280] ata4: limiting SATA link speed to 1.5 Gbps
[ 8291.640292] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8291.640322] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8291.640339] ata4.00: failed command: DATA SET MANAGEMENT
[ 8291.640351] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 3 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8291.640384] ata4.00: status: { DRDY }
[ 8291.640401] ata4: hard resetting link
[ 8291.908263] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8291.953564] ata4.00: configured for UDMA/133
[ 8291.957529] ata4: EH complete
[ 8322.373468] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8322.373506] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8322.373524] ata4.00: failed command: DATA SET MANAGEMENT
[ 8322.373541] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 17 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8322.373573] ata4.00: status: { DRDY }
[ 8322.373589] ata4: hard resetting link
[ 8322.641458] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8322.686751] ata4.00: configured for UDMA/133
[ 8322.690730] ata4: EH complete
[ 8355.130732] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8355.130768] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8355.130787] ata4.00: failed command: DATA SET MANAGEMENT
[ 8355.130800] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 22 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8355.130831] ata4.00: status: { DRDY }
[ 8355.130847] ata4: hard resetting link
[ 8355.398739] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8355.444033] ata4.00: configured for UDMA/133
[ 8355.448002] ata4: EH complete
[ 8385.859925] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8385.859962] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8385.859979] ata4.00: failed command: DATA SET MANAGEMENT
[ 8385.859992] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8385.861295] ata4.00: status: { DRDY }
[ 8385.861948] ata4: hard resetting link
[ 8386.135929] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8386.181218] ata4.00: configured for UDMA/133
[ 8386.185190] ata4: EH complete
[ 8416.581175] ata4.00: limiting speed to UDMA/100:PIO4
[ 8416.581186] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8416.581863] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8416.582515] ata4.00: failed command: DATA SET MANAGEMENT
[ 8416.583166] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 3 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8416.584463] ata4.00: status: { DRDY }
[ 8416.585171] ata4: hard resetting link
[ 8416.853125] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8416.898421] ata4.00: configured for UDMA/100
[ 8416.902389] ata4: EH complete
[ 8447.302307] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8447.303000] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8447.303653] ata4.00: failed command: DATA SET MANAGEMENT
[ 8447.304302] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 15 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8447.305607] ata4.00: status: { DRDY }
[ 8447.306316] ata4: hard resetting link
[ 8447.574322] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8447.619621] ata4.00: configured for UDMA/100
[ 8447.623533] ata4: EH complete
[ 8478.023495] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8478.023512] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8478.023522] ata4.00: failed command: DATA SET MANAGEMENT
[ 8478.023527] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 21 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8478.023543] ata4.00: status: { DRDY }
[ 8478.023552] ata4: hard resetting link
[ 8478.291510] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8478.336796] ata4.00: configured for UDMA/100
[ 8478.340774] ata4: EH complete
[ 8508.740694] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8508.740712] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8508.740721] ata4.00: failed command: DATA SET MANAGEMENT
[ 8508.740726] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 4 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 8508.740742] ata4.00: status: { DRDY }
[ 8508.740752] ata4: hard resetting link
[ 8509.008632] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8509.053890] ata4.00: configured for UDMA/100
[ 8509.057805] ata4: EH complete
[ 8539.396782] ata4.00: limiting speed to UDMA/33:PIO4
[ 8539.396791] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8539.396797] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8539.396805] ata4.00: failed command: DATA SET MANAGEMENT
[ 8539.396808] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 5 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8539.396820] ata4.00: status: { DRDY }
[ 8539.396828] ata4: hard resetting link
[ 8539.664196] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8539.709382] ata4.00: configured for UDMA/33
[ 8539.713409] ata4: EH complete
[ 8572.161225] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8572.161243] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8572.161254] ata4.00: failed command: DATA SET MANAGEMENT
[ 8572.161259] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 15 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8572.161275] ata4.00: status: { DRDY }
[ 8572.161285] ata4: hard resetting link
[ 8572.429243] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8572.474420] ata4.00: configured for UDMA/33
[ 8572.478404] ata4: EH complete
[ 8604.929495] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8604.929514] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8604.929524] ata4.00: failed command: DATA SET MANAGEMENT
[ 8604.929528] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 11 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8604.929545] ata4.00: status: { DRDY }
[ 8604.929555] ata4: hard resetting link
[ 8605.197413] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8605.242713] ata4.00: configured for UDMA/33
[ 8605.246685] ata4: EH complete
[ 8637.694719] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8637.694736] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8637.694746] ata4.00: failed command: DATA SET MANAGEMENT
[ 8637.694750] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 13 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8637.694767] ata4.00: status: { DRDY }
[ 8637.694776] ata4: hard resetting link
[ 8637.962671] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8638.007917] ata4.00: configured for UDMA/33
[ 8638.011882] ata4: EH complete
[ 8670.475957] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8670.475970] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8670.475976] ata4.00: failed command: DATA SET MANAGEMENT
[ 8670.475978] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 13 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8670.475986] ata4.00: status: { DRDY }
[ 8670.475991] ata4: hard resetting link
[ 8670.744050] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8670.789289] ata4.00: configured for UDMA/33
[ 8670.793202] ata4: EH complete
[ 8703.233163] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8703.233180] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8703.233190] ata4.00: failed command: DATA SET MANAGEMENT
[ 8703.233195] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 10 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8703.233211] ata4.00: status: { DRDY }
[ 8703.233221] ata4: hard resetting link
[ 8703.501155] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8703.546308] ata4.00: configured for UDMA/33
[ 8703.550280] ata4: EH complete
[ 8733.958126] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8733.958145] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8733.958155] ata4.00: failed command: DATA SET MANAGEMENT
[ 8733.958159] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 13 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8733.958176] ata4.00: status: { DRDY }
[ 8733.958185] ata4: hard resetting link
[ 8734.226124] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8734.271378] ata4.00: configured for UDMA/33
[ 8734.275347] ata4: EH complete
[ 8764.670944] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8764.670962] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8764.670972] ata4.00: failed command: DATA SET MANAGEMENT
[ 8764.670977] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 15 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8764.670993] ata4.00: status: { DRDY }
[ 8764.671002] ata4: hard resetting link
[ 8764.938933] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8764.984184] ata4.00: configured for UDMA/33
[ 8764.988146] ata4: EH complete
[ 8795.391637] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8795.391655] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8795.391665] ata4.00: failed command: DATA SET MANAGEMENT
[ 8795.391670] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 15 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8795.391686] ata4.00: status: { DRDY }
[ 8795.391695] ata4: hard resetting link
[ 8795.659626] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8795.704805] ata4.00: configured for UDMA/33
[ 8795.708874] ata4: EH complete
[ 8826.124454] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8826.124471] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8826.124481] ata4.00: failed command: DATA SET MANAGEMENT
[ 8826.124485] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 9 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8826.124501] ata4.00: status: { DRDY }
[ 8826.124511] ata4: hard resetting link
[ 8826.392384] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8826.437629] ata4.00: configured for UDMA/33
[ 8826.441606] ata4: EH complete
[ 8856.833211] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8856.833229] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8856.833238] ata4.00: failed command: DATA SET MANAGEMENT
[ 8856.833243] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 6 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8856.833259] ata4.00: status: { DRDY }
[ 8856.833269] ata4: hard resetting link
[ 8857.101201] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8857.146444] ata4.00: configured for UDMA/33
[ 8857.150422] ata4: EH complete
[ 8887.558052] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8887.558070] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8887.558080] ata4.00: failed command: DATA SET MANAGEMENT
[ 8887.558085] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 15 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8887.558101] ata4.00: status: { DRDY }
[ 8887.558111] ata4: hard resetting link
[ 8887.826095] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8887.871349] ata4.00: configured for UDMA/33
[ 8887.875314] ata4: EH complete
[ 8918.278881] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8918.278899] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8918.278908] ata4.00: failed command: DATA SET MANAGEMENT
[ 8918.278913] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 3 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8918.278929] ata4.00: status: { DRDY }
[ 8918.278940] ata4: hard resetting link
[ 8918.546880] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8918.592047] ata4.00: configured for UDMA/33
[ 8918.596081] ata4: EH complete
[ 8948.995744] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8948.995762] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8948.995771] ata4.00: failed command: DATA SET MANAGEMENT
[ 8948.995776] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 4 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 8948.995792] ata4.00: status: { DRDY }
[ 8948.995803] ata4: hard resetting link
[ 8949.263742] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8949.308991] ata4.00: configured for UDMA/33
[ 8949.312963] ata4: EH complete
[ 8981.768658] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8981.768677] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8981.768688] ata4.00: failed command: DATA SET MANAGEMENT
[ 8981.768692] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 21 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8981.768709] ata4.00: status: { DRDY }
[ 8981.768717] ata4: hard resetting link
[ 8982.036665] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8982.081918] ata4.00: configured for UDMA/33
[ 8982.085881] ata4: EH complete
[ 9012.485677] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9012.485694] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9012.485703] ata4.00: failed command: DATA SET MANAGEMENT
[ 9012.485708] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 7 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9012.485725] ata4.00: status: { DRDY }
[ 9012.485735] ata4: hard resetting link
[ 9012.753650] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9012.798835] ata4.00: configured for UDMA/33
[ 9012.802857] ata4: EH complete
[ 9043.219308] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9043.219319] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9043.219325] ata4.00: failed command: DATA SET MANAGEMENT
[ 9043.219328] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 9 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9043.219337] ata4.00: status: { DRDY }
[ 9043.219343] ata4: hard resetting link
[ 9043.487273] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9043.532459] ata4.00: configured for UDMA/33
[ 9043.536421] ata4: EH complete
[ 9075.985015] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9075.985033] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9075.985042] ata4.00: failed command: DATA SET MANAGEMENT
[ 9075.985047] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 4 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9075.985062] ata4.00: status: { DRDY }
[ 9075.985073] ata4: hard resetting link
[ 9076.252960] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9076.298262] ata4.00: configured for UDMA/33
[ 9076.302223] ata4: EH complete
[ 9108.742448] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9108.742466] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9108.742476] ata4.00: failed command: DATA SET MANAGEMENT
[ 9108.742481] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 19 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9108.742497] ata4.00: status: { DRDY }
[ 9108.742506] ata4: hard resetting link
[ 9109.010456] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9109.055746] ata4.00: configured for UDMA/33
[ 9109.059725] ata4: EH complete
[ 9139.467760] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9139.467778] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9139.467789] ata4.00: failed command: DATA SET MANAGEMENT
[ 9139.467793] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 17 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9139.467810] ata4.00: status: { DRDY }
[ 9139.467819] ata4: hard resetting link
[ 9139.735758] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9139.780954] ata4.00: configured for UDMA/33
[ 9139.784982] ata4: EH complete
[ 9172.245063] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9172.245082] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9172.245095] ata4.00: failed command: DATA SET MANAGEMENT
[ 9172.245101] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 31 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9172.245120] ata4.00: status: { DRDY }
[ 9172.245129] ata4: hard resetting link
[ 9172.513061] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9172.558362] ata4.00: configured for UDMA/33
[ 9172.562277] ata4: EH complete
[ 9205.010323] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9205.010341] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9205.010352] ata4.00: failed command: DATA SET MANAGEMENT
[ 9205.010357] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 22 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9205.010373] ata4.00: status: { DRDY }
[ 9205.010382] ata4: hard resetting link
[ 9205.278328] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9205.323626] ata4.00: configured for UDMA/33
[ 9205.327593] ata4: EH complete
[ 9235.731396] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9235.731416] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9235.731431] ata4.00: failed command: DATA SET MANAGEMENT
[ 9235.731437] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 14 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9235.731458] ata4.00: status: { DRDY }
[ 9235.731471] ata4: hard resetting link
[ 9235.999380] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9236.044551] ata4.00: configured for UDMA/33
[ 9236.048588] ata4: EH complete
[ 9268.500649] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9268.500666] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9268.500677] ata4.00: failed command: DATA SET MANAGEMENT
[ 9268.500682] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 23 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9268.500698] ata4.00: status: { DRDY }
[ 9268.500707] ata4: hard resetting link
[ 9268.768621] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9268.813917] ata4.00: configured for UDMA/33
[ 9268.817891] ata4: EH complete
[ 9301.285705] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9301.285723] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9301.285733] ata4.00: failed command: DATA SET MANAGEMENT
[ 9301.285738] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 15 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9301.285754] ata4.00: status: { DRDY }
[ 9301.285763] ata4: hard resetting link
[ 9301.561697] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9301.606960] ata4.00: configured for UDMA/33
[ 9301.610915] ata4: EH complete
[ 9334.042901] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9334.042918] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9334.042930] ata4.00: failed command: DATA SET MANAGEMENT
[ 9334.042935] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 31 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9334.042951] ata4.00: status: { DRDY }
[ 9334.042959] ata4: hard resetting link
[ 9334.310904] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9334.356084] ata4.00: configured for UDMA/33
[ 9334.360117] ata4: EH complete
[ 9366.812049] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9366.812067] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9366.812077] ata4.00: failed command: DATA SET MANAGEMENT
[ 9366.812082] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 23 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9366.812099] ata4.00: status: { DRDY }
[ 9366.812107] ata4: hard resetting link
[ 9367.079996] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9367.125160] ata4.00: configured for UDMA/33
[ 9367.129143] ata4: EH complete
[ 9399.581096] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9399.581113] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9399.581123] ata4.00: failed command: DATA SET MANAGEMENT
[ 9399.581128] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 14 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9399.581144] ata4.00: status: { DRDY }
[ 9399.581153] ata4: hard resetting link
[ 9399.849087] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9399.894281] ata4.00: configured for UDMA/33
[ 9399.898304] ata4: EH complete
[ 9430.298073] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9430.298090] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9430.298100] ata4.00: failed command: DATA SET MANAGEMENT
[ 9430.298159] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 10 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9430.298178] ata4.00: status: { DRDY }
[ 9430.298191] ata4: hard resetting link
[ 9430.566053] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9430.611304] ata4.00: configured for UDMA/33
[ 9430.615333] ata4: EH complete
[ 9463.075163] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9463.075180] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9463.075191] ata4.00: failed command: DATA SET MANAGEMENT
[ 9463.075196] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 21 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9463.075213] ata4.00: status: { DRDY }
[ 9463.075221] ata4: hard resetting link
[ 9463.347093] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9463.392330] ata4.00: configured for UDMA/33
[ 9463.396295] ata4: EH complete
[ 9493.792140] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9493.792159] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9493.792168] ata4.00: failed command: DATA SET MANAGEMENT
[ 9493.792172] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 2 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9493.792189] ata4.00: status: { DRDY }
[ 9493.792199] ata4: hard resetting link
[ 9494.060089] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9494.105357] ata4.00: configured for UDMA/33
[ 9494.109254] ata4: EH complete
[ 9524.513378] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9524.513396] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9524.513405] ata4.00: failed command: DATA SET MANAGEMENT
[ 9524.513410] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 8 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9524.513426] ata4.00: status: { DRDY }
[ 9524.513436] ata4: hard resetting link
[ 9524.781401] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9524.826575] ata4.00: configured for UDMA/33
[ 9524.830548] ata4: EH complete
[ 9555.244190] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9555.244210] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9555.244222] ata4.00: failed command: DATA SET MANAGEMENT
[ 9555.244230] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 7 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9555.244249] ata4.00: status: { DRDY }
[ 9555.244261] ata4: hard resetting link
[ 9555.516148] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9555.561377] ata4.00: configured for UDMA/33
[ 9555.565282] ata4: EH complete
[ 9588.002961] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9588.002979] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9588.002990] ata4.00: failed command: DATA SET MANAGEMENT
[ 9588.002995] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 26 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9588.003011] ata4.00: status: { DRDY }
[ 9588.003020] ata4: hard resetting link
[ 9588.275011] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9588.320186] ata4.00: configured for UDMA/33
[ 9588.324184] ata4: EH complete
[ 9618.725504] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9618.725521] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9618.725532] ata4.00: failed command: DATA SET MANAGEMENT
[ 9618.725537] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 26 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9618.725553] ata4.00: status: { DRDY }
[ 9618.725562] ata4: hard resetting link
[ 9618.993461] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9619.038702] ata4.00: configured for UDMA/33
[ 9619.042614] ata4: EH complete
[ 9649.443752] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9649.443770] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9649.443782] ata4.00: failed command: DATA SET MANAGEMENT
[ 9649.443786] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 28 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9649.443802] ata4.00: status: { DRDY }
[ 9649.443811] ata4: hard resetting link
[ 9649.711822] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9649.757073] ata4.00: configured for UDMA/33
[ 9649.761031] ata4: EH complete
[ 9680.173935] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9680.173946] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9680.173951] ata4.00: failed command: DATA SET MANAGEMENT
[ 9680.173953] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 21 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9680.173960] ata4.00: status: { DRDY }
[ 9680.173964] ata4: hard resetting link
[ 9680.449861] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9680.495065] ata4.00: configured for UDMA/33
[ 9680.498997] ata4: EH complete
[ 9710.888080] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9710.888098] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9710.888107] ata4.00: failed command: READ DMA
[ 9710.888111] ata4.00: cmd c8/00:08:e8:ba:00/00:00:00:00:00/e2 tag 6 dma 4096 in
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9710.888128] ata4.00: status: { DRDY }
[ 9710.888138] ata4: hard resetting link
[ 9711.156015] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9711.201259] ata4.00: configured for UDMA/33
[ 9711.205283] sd 3:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=30s
[ 9711.205297] sd 3:0:0:0: [sda] tag#6 Sense Key : Aborted Command [current] 
[ 9711.205302] sd 3:0:0:0: [sda] tag#6 Add. Sense: No additional sense information
[ 9711.205308] sd 3:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 02 00 ba e8 00 00 08 00
[ 9711.205312] I/O error, dev sda, sector 33602280 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 9711.205349] ata4: EH complete
[ 9741.613999] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9741.614017] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9741.614026] ata4.00: failed command: DATA SET MANAGEMENT
[ 9741.614031] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 10 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9741.614047] ata4.00: status: { DRDY }
[ 9741.614057] ata4: hard resetting link
[ 9741.881992] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9741.927287] ata4.00: configured for UDMA/33
[ 9741.931201] ata4: EH complete
[ 9772.335877] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9772.335897] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9772.335908] ata4.00: failed command: DATA SET MANAGEMENT
[ 9772.335913] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 19 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9772.335929] ata4.00: status: { DRDY }
[ 9772.335938] ata4: hard resetting link
[ 9772.603874] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9772.649119] ata4.00: configured for UDMA/33
[ 9772.653139] ata4: EH complete
[ 9803.057688] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9803.057705] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9803.057714] ata4.00: failed command: DATA SET MANAGEMENT
[ 9803.057718] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9803.057734] ata4.00: status: { DRDY }
[ 9803.057745] ata4: hard resetting link
[ 9803.325615] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9803.370870] ata4.00: configured for UDMA/33
[ 9803.374788] ata4: EH complete
[ 9833.779415] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9833.779433] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9833.779442] ata4.00: failed command: DATA SET MANAGEMENT
[ 9833.779447] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 8 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9833.779463] ata4.00: status: { DRDY }
[ 9833.779473] ata4: hard resetting link
[ 9834.047416] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9834.092660] ata4.00: configured for UDMA/33
[ 9834.096558] ata4: EH complete
[ 9870.645353] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9870.645367] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9870.645376] ata4.00: failed command: DATA SET MANAGEMENT
[ 9870.645387] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 15 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9870.645398] ata4.00: status: { DRDY }
[ 9870.645406] ata4: hard resetting link
[ 9870.917481] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9870.962723] ata4.00: configured for UDMA/33
[ 9870.966635] ata4: EH complete
[ 9901.371036] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9901.371053] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9901.371064] ata4.00: failed command: DATA SET MANAGEMENT
[ 9901.371068] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 21 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9901.371085] ata4.00: status: { DRDY }
[ 9901.371094] ata4: hard resetting link
[ 9901.639031] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9901.684285] ata4.00: configured for UDMA/33
[ 9901.688310] ata4: EH complete
[ 9932.080590] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9932.080608] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9932.080618] ata4.00: failed command: DATA SET MANAGEMENT
[ 9932.080623] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 12 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9932.080639] ata4.00: status: { DRDY }
[ 9932.080650] ata4: hard resetting link
[ 9932.348593] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9932.393843] ata4.00: configured for UDMA/33
[ 9932.397754] ata4: EH complete
[ 9964.854218] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9964.854237] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9964.854249] ata4.00: failed command: DATA SET MANAGEMENT
[ 9964.854254] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 27 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9964.854270] ata4.00: status: { DRDY }
[ 9964.854279] ata4: hard resetting link
[ 9965.122215] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9965.167470] ata4.00: configured for UDMA/33
[ 9965.171436] ata4: EH complete
[ 9997.635788] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9997.635805] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9997.635814] ata4.00: failed command: DATA SET MANAGEMENT
[ 9997.635818] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9997.635834] ata4.00: status: { DRDY }
[ 9997.635845] ata4: hard resetting link
[ 9997.903855] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9997.949146] ata4.00: configured for UDMA/33
[ 9997.953119] ata4: EH complete
J'ai trouvé ce fil (et pour l'instant ça a l'air de marcher, donc à confirmer encore, mais je laisse ça là pour référence et confirmerai ou non)
https://bbs.archlinux.org/viewtopic.php?id=136907
Haut
Avatar de l’utilisateur
lann
Site Admin
Messages : 127
Inscription : 28 déc. 2024 11:51
Localisation : Queven
Contact :
Contacter lann

Re: Freeze sur les SSDs de l'asso

Message par lann »

Tu as mis à jour le firmware du SSD ?
EDIT: Firmware upgrade on hard drive resolve issue.
Haut
Avatar de l’utilisateur
Otyugh
Messages : 144
Inscription : 28 déc. 2024 18:35
Contact :
Contacter Otyugh

Re: Freeze sur les SSDs de l'asso

Message par Otyugh »

Nah j'ai juste mis pcie_aspm=off dans l'option grub ; j'ai pas encore eu le souci mais le pb étant aléatoire, pas dit que ce soit ça (faut bien attendre une semaine).
Haut
Répondre

Revenir à « Problèmes et pannes matériels »