Libre à Quimperlé

Yop,
à investiguer mais j'ai des ralentissement réguliers (des freeze de ~20-40s) et ça vient apparemment du SSD (qui n'a aucune sourcis dans les stats SMART) qui spamme dmesg.

Modèle : Crucial BX500 240GB 3D NAND SATA 2.5-inch SSD

Code : Tout sélectionner

[ 7927.082054] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 7927.082074] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 7927.082088] ata4.00: failed command: DATA SET MANAGEMENT
[ 7927.082093] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 24 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 7927.082110] ata4.00: status: { DRDY }
[ 7927.082119] ata4: hard resetting link
[ 7927.350096] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7927.395370] ata4.00: configured for UDMA/133
[ 7927.399334] ata4: EH complete
[ 7961.907444] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 7961.907461] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 7961.907470] ata4.00: failed command: DATA SET MANAGEMENT
[ 7961.907475] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 10 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 7961.907491] ata4.00: status: { DRDY }
[ 7961.907501] ata4: hard resetting link
[ 7962.175452] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7962.220721] ata4.00: configured for UDMA/133
[ 7962.224692] ata4: EH complete
[ 8000.817027] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8000.817047] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8000.817059] ata4.00: failed command: DATA SET MANAGEMENT
[ 8000.817066] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 7 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8000.817086] ata4.00: status: { DRDY }
[ 8000.817099] ata4: hard resetting link
[ 8001.084963] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8001.130238] ata4.00: configured for UDMA/133
[ 8001.134153] ata4: EH complete
[ 8033.594259] ata4.00: NCQ disabled due to excessive errors
[ 8033.594271] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8033.594282] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8033.594291] ata4.00: failed command: DATA SET MANAGEMENT
[ 8033.594295] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 7 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8033.594311] ata4.00: status: { DRDY }
[ 8033.594322] ata4: hard resetting link
[ 8033.862237] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8033.907481] ata4.00: configured for UDMA/133
[ 8033.911443] ata4: EH complete
[ 8068.403586] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8068.403623] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8068.403641] ata4.00: failed command: DATA SET MANAGEMENT
[ 8068.403653] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 14 dma 512 out
                        res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8068.403685] ata4.00: status: { DRDY }
[ 8068.403701] ata4: hard resetting link
[ 8068.671591] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8068.716831] ata4.00: configured for UDMA/133
[ 8068.720801] ata4: EH complete
[ 8103.216939] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8103.216977] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8103.216993] ata4.00: failed command: DATA SET MANAGEMENT
[ 8103.217005] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 1 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8103.217038] ata4.00: status: { DRDY }
[ 8103.217055] ata4: hard resetting link
[ 8103.484946] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8103.530192] ata4.00: configured for UDMA/133
[ 8103.534162] ata4: EH complete
[ 8135.994276] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8135.994312] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8135.994330] ata4.00: failed command: DATA SET MANAGEMENT
[ 8135.994343] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 14 dma 512 out
                        res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8135.994374] ata4.00: status: { DRDY }
[ 8135.994391] ata4: hard resetting link
[ 8136.262215] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 8136.307387] ata4.00: configured for UDMA/133
[ 8136.311426] ata4: EH complete
[ 8168.763549] ata4: limiting SATA link speed to 3.0 Gbps
[ 8168.763561] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8168.763590] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8168.763607] ata4.00: failed command: DATA SET MANAGEMENT
[ 8168.763619] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 16 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8168.763659] ata4.00: status: { DRDY }
[ 8168.763678] ata4: hard resetting link
[ 8169.031497] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 8169.076734] ata4.00: configured for UDMA/133
[ 8169.080713] ata4: EH complete
[ 8199.484743] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8199.484779] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8199.484796] ata4.00: failed command: DATA SET MANAGEMENT
[ 8199.484808] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 2 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8199.484843] ata4.00: status: { DRDY }
[ 8199.484861] ata4: hard resetting link
[ 8199.752686] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 8199.797924] ata4.00: configured for UDMA/133
[ 8199.801896] ata4: EH complete
[ 8230.209859] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8230.209900] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8230.209918] ata4.00: failed command: DATA SET MANAGEMENT
[ 8230.209930] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 16 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8230.209962] ata4.00: status: { DRDY }
[ 8230.209978] ata4: hard resetting link
[ 8230.477879] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 8230.523114] ata4.00: configured for UDMA/133
[ 8230.527086] ata4: EH complete
[ 8260.927064] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8260.927100] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8260.927116] ata4.00: failed command: DATA SET MANAGEMENT
[ 8260.927128] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 1 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8260.927160] ata4.00: status: { DRDY }
[ 8260.927177] ata4: hard resetting link
[ 8261.195076] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 8261.240366] ata4.00: configured for UDMA/133
[ 8261.244333] ata4: EH complete
[ 8291.640280] ata4: limiting SATA link speed to 1.5 Gbps
[ 8291.640292] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8291.640322] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8291.640339] ata4.00: failed command: DATA SET MANAGEMENT
[ 8291.640351] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 3 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8291.640384] ata4.00: status: { DRDY }
[ 8291.640401] ata4: hard resetting link
[ 8291.908263] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8291.953564] ata4.00: configured for UDMA/133
[ 8291.957529] ata4: EH complete
[ 8322.373468] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8322.373506] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8322.373524] ata4.00: failed command: DATA SET MANAGEMENT
[ 8322.373541] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 17 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8322.373573] ata4.00: status: { DRDY }
[ 8322.373589] ata4: hard resetting link
[ 8322.641458] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8322.686751] ata4.00: configured for UDMA/133
[ 8322.690730] ata4: EH complete
[ 8355.130732] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8355.130768] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8355.130787] ata4.00: failed command: DATA SET MANAGEMENT
[ 8355.130800] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 22 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8355.130831] ata4.00: status: { DRDY }
[ 8355.130847] ata4: hard resetting link
[ 8355.398739] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8355.444033] ata4.00: configured for UDMA/133
[ 8355.448002] ata4: EH complete
[ 8385.859925] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8385.859962] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8385.859979] ata4.00: failed command: DATA SET MANAGEMENT
[ 8385.859992] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8385.861295] ata4.00: status: { DRDY }
[ 8385.861948] ata4: hard resetting link
[ 8386.135929] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8386.181218] ata4.00: configured for UDMA/133
[ 8386.185190] ata4: EH complete
[ 8416.581175] ata4.00: limiting speed to UDMA/100:PIO4
[ 8416.581186] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8416.581863] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8416.582515] ata4.00: failed command: DATA SET MANAGEMENT
[ 8416.583166] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 3 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8416.584463] ata4.00: status: { DRDY }
[ 8416.585171] ata4: hard resetting link
[ 8416.853125] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8416.898421] ata4.00: configured for UDMA/100
[ 8416.902389] ata4: EH complete
[ 8447.302307] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8447.303000] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8447.303653] ata4.00: failed command: DATA SET MANAGEMENT
[ 8447.304302] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 15 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8447.305607] ata4.00: status: { DRDY }
[ 8447.306316] ata4: hard resetting link
[ 8447.574322] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8447.619621] ata4.00: configured for UDMA/100
[ 8447.623533] ata4: EH complete
[ 8478.023495] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8478.023512] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8478.023522] ata4.00: failed command: DATA SET MANAGEMENT
[ 8478.023527] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 21 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8478.023543] ata4.00: status: { DRDY }
[ 8478.023552] ata4: hard resetting link
[ 8478.291510] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8478.336796] ata4.00: configured for UDMA/100
[ 8478.340774] ata4: EH complete
[ 8508.740694] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8508.740712] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8508.740721] ata4.00: failed command: DATA SET MANAGEMENT
[ 8508.740726] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 4 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 8508.740742] ata4.00: status: { DRDY }
[ 8508.740752] ata4: hard resetting link
[ 8509.008632] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8509.053890] ata4.00: configured for UDMA/100
[ 8509.057805] ata4: EH complete
[ 8539.396782] ata4.00: limiting speed to UDMA/33:PIO4
[ 8539.396791] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8539.396797] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8539.396805] ata4.00: failed command: DATA SET MANAGEMENT
[ 8539.396808] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 5 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8539.396820] ata4.00: status: { DRDY }
[ 8539.396828] ata4: hard resetting link
[ 8539.664196] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8539.709382] ata4.00: configured for UDMA/33
[ 8539.713409] ata4: EH complete
[ 8572.161225] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8572.161243] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8572.161254] ata4.00: failed command: DATA SET MANAGEMENT
[ 8572.161259] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 15 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8572.161275] ata4.00: status: { DRDY }
[ 8572.161285] ata4: hard resetting link
[ 8572.429243] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8572.474420] ata4.00: configured for UDMA/33
[ 8572.478404] ata4: EH complete
[ 8604.929495] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8604.929514] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8604.929524] ata4.00: failed command: DATA SET MANAGEMENT
[ 8604.929528] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 11 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8604.929545] ata4.00: status: { DRDY }
[ 8604.929555] ata4: hard resetting link
[ 8605.197413] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8605.242713] ata4.00: configured for UDMA/33
[ 8605.246685] ata4: EH complete
[ 8637.694719] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8637.694736] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8637.694746] ata4.00: failed command: DATA SET MANAGEMENT
[ 8637.694750] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 13 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8637.694767] ata4.00: status: { DRDY }
[ 8637.694776] ata4: hard resetting link
[ 8637.962671] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8638.007917] ata4.00: configured for UDMA/33
[ 8638.011882] ata4: EH complete
[ 8670.475957] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8670.475970] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8670.475976] ata4.00: failed command: DATA SET MANAGEMENT
[ 8670.475978] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 13 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8670.475986] ata4.00: status: { DRDY }
[ 8670.475991] ata4: hard resetting link
[ 8670.744050] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8670.789289] ata4.00: configured for UDMA/33
[ 8670.793202] ata4: EH complete
[ 8703.233163] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8703.233180] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8703.233190] ata4.00: failed command: DATA SET MANAGEMENT
[ 8703.233195] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 10 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8703.233211] ata4.00: status: { DRDY }
[ 8703.233221] ata4: hard resetting link
[ 8703.501155] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8703.546308] ata4.00: configured for UDMA/33
[ 8703.550280] ata4: EH complete
[ 8733.958126] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8733.958145] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8733.958155] ata4.00: failed command: DATA SET MANAGEMENT
[ 8733.958159] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 13 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8733.958176] ata4.00: status: { DRDY }
[ 8733.958185] ata4: hard resetting link
[ 8734.226124] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8734.271378] ata4.00: configured for UDMA/33
[ 8734.275347] ata4: EH complete
[ 8764.670944] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8764.670962] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8764.670972] ata4.00: failed command: DATA SET MANAGEMENT
[ 8764.670977] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 15 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8764.670993] ata4.00: status: { DRDY }
[ 8764.671002] ata4: hard resetting link
[ 8764.938933] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8764.984184] ata4.00: configured for UDMA/33
[ 8764.988146] ata4: EH complete
[ 8795.391637] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8795.391655] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8795.391665] ata4.00: failed command: DATA SET MANAGEMENT
[ 8795.391670] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 15 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8795.391686] ata4.00: status: { DRDY }
[ 8795.391695] ata4: hard resetting link
[ 8795.659626] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8795.704805] ata4.00: configured for UDMA/33
[ 8795.708874] ata4: EH complete
[ 8826.124454] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8826.124471] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8826.124481] ata4.00: failed command: DATA SET MANAGEMENT
[ 8826.124485] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 9 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8826.124501] ata4.00: status: { DRDY }
[ 8826.124511] ata4: hard resetting link
[ 8826.392384] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8826.437629] ata4.00: configured for UDMA/33
[ 8826.441606] ata4: EH complete
[ 8856.833211] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8856.833229] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8856.833238] ata4.00: failed command: DATA SET MANAGEMENT
[ 8856.833243] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 6 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8856.833259] ata4.00: status: { DRDY }
[ 8856.833269] ata4: hard resetting link
[ 8857.101201] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8857.146444] ata4.00: configured for UDMA/33
[ 8857.150422] ata4: EH complete
[ 8887.558052] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8887.558070] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8887.558080] ata4.00: failed command: DATA SET MANAGEMENT
[ 8887.558085] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 15 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8887.558101] ata4.00: status: { DRDY }
[ 8887.558111] ata4: hard resetting link
[ 8887.826095] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8887.871349] ata4.00: configured for UDMA/33
[ 8887.875314] ata4: EH complete
[ 8918.278881] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8918.278899] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8918.278908] ata4.00: failed command: DATA SET MANAGEMENT
[ 8918.278913] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 3 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8918.278929] ata4.00: status: { DRDY }
[ 8918.278940] ata4: hard resetting link
[ 8918.546880] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8918.592047] ata4.00: configured for UDMA/33
[ 8918.596081] ata4: EH complete
[ 8948.995744] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8948.995762] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8948.995771] ata4.00: failed command: DATA SET MANAGEMENT
[ 8948.995776] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 4 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 8948.995792] ata4.00: status: { DRDY }
[ 8948.995803] ata4: hard resetting link
[ 8949.263742] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8949.308991] ata4.00: configured for UDMA/33
[ 8949.312963] ata4: EH complete
[ 8981.768658] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 8981.768677] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 8981.768688] ata4.00: failed command: DATA SET MANAGEMENT
[ 8981.768692] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 21 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8981.768709] ata4.00: status: { DRDY }
[ 8981.768717] ata4: hard resetting link
[ 8982.036665] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8982.081918] ata4.00: configured for UDMA/33
[ 8982.085881] ata4: EH complete
[ 9012.485677] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9012.485694] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9012.485703] ata4.00: failed command: DATA SET MANAGEMENT
[ 9012.485708] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 7 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9012.485725] ata4.00: status: { DRDY }
[ 9012.485735] ata4: hard resetting link
[ 9012.753650] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9012.798835] ata4.00: configured for UDMA/33
[ 9012.802857] ata4: EH complete
[ 9043.219308] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9043.219319] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9043.219325] ata4.00: failed command: DATA SET MANAGEMENT
[ 9043.219328] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 9 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9043.219337] ata4.00: status: { DRDY }
[ 9043.219343] ata4: hard resetting link
[ 9043.487273] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9043.532459] ata4.00: configured for UDMA/33
[ 9043.536421] ata4: EH complete
[ 9075.985015] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9075.985033] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9075.985042] ata4.00: failed command: DATA SET MANAGEMENT
[ 9075.985047] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 4 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9075.985062] ata4.00: status: { DRDY }
[ 9075.985073] ata4: hard resetting link
[ 9076.252960] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9076.298262] ata4.00: configured for UDMA/33
[ 9076.302223] ata4: EH complete
[ 9108.742448] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9108.742466] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9108.742476] ata4.00: failed command: DATA SET MANAGEMENT
[ 9108.742481] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 19 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9108.742497] ata4.00: status: { DRDY }
[ 9108.742506] ata4: hard resetting link
[ 9109.010456] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9109.055746] ata4.00: configured for UDMA/33
[ 9109.059725] ata4: EH complete
[ 9139.467760] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9139.467778] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9139.467789] ata4.00: failed command: DATA SET MANAGEMENT
[ 9139.467793] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 17 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9139.467810] ata4.00: status: { DRDY }
[ 9139.467819] ata4: hard resetting link
[ 9139.735758] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9139.780954] ata4.00: configured for UDMA/33
[ 9139.784982] ata4: EH complete
[ 9172.245063] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9172.245082] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9172.245095] ata4.00: failed command: DATA SET MANAGEMENT
[ 9172.245101] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 31 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9172.245120] ata4.00: status: { DRDY }
[ 9172.245129] ata4: hard resetting link
[ 9172.513061] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9172.558362] ata4.00: configured for UDMA/33
[ 9172.562277] ata4: EH complete
[ 9205.010323] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9205.010341] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9205.010352] ata4.00: failed command: DATA SET MANAGEMENT
[ 9205.010357] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 22 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9205.010373] ata4.00: status: { DRDY }
[ 9205.010382] ata4: hard resetting link
[ 9205.278328] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9205.323626] ata4.00: configured for UDMA/33
[ 9205.327593] ata4: EH complete
[ 9235.731396] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9235.731416] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9235.731431] ata4.00: failed command: DATA SET MANAGEMENT
[ 9235.731437] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 14 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9235.731458] ata4.00: status: { DRDY }
[ 9235.731471] ata4: hard resetting link
[ 9235.999380] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9236.044551] ata4.00: configured for UDMA/33
[ 9236.048588] ata4: EH complete
[ 9268.500649] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9268.500666] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9268.500677] ata4.00: failed command: DATA SET MANAGEMENT
[ 9268.500682] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 23 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9268.500698] ata4.00: status: { DRDY }
[ 9268.500707] ata4: hard resetting link
[ 9268.768621] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9268.813917] ata4.00: configured for UDMA/33
[ 9268.817891] ata4: EH complete
[ 9301.285705] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9301.285723] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9301.285733] ata4.00: failed command: DATA SET MANAGEMENT
[ 9301.285738] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 15 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9301.285754] ata4.00: status: { DRDY }
[ 9301.285763] ata4: hard resetting link
[ 9301.561697] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9301.606960] ata4.00: configured for UDMA/33
[ 9301.610915] ata4: EH complete
[ 9334.042901] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9334.042918] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9334.042930] ata4.00: failed command: DATA SET MANAGEMENT
[ 9334.042935] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 31 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9334.042951] ata4.00: status: { DRDY }
[ 9334.042959] ata4: hard resetting link
[ 9334.310904] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9334.356084] ata4.00: configured for UDMA/33
[ 9334.360117] ata4: EH complete
[ 9366.812049] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9366.812067] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9366.812077] ata4.00: failed command: DATA SET MANAGEMENT
[ 9366.812082] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 23 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9366.812099] ata4.00: status: { DRDY }
[ 9366.812107] ata4: hard resetting link
[ 9367.079996] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9367.125160] ata4.00: configured for UDMA/33
[ 9367.129143] ata4: EH complete
[ 9399.581096] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9399.581113] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9399.581123] ata4.00: failed command: DATA SET MANAGEMENT
[ 9399.581128] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 14 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9399.581144] ata4.00: status: { DRDY }
[ 9399.581153] ata4: hard resetting link
[ 9399.849087] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9399.894281] ata4.00: configured for UDMA/33
[ 9399.898304] ata4: EH complete
[ 9430.298073] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9430.298090] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9430.298100] ata4.00: failed command: DATA SET MANAGEMENT
[ 9430.298159] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 10 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9430.298178] ata4.00: status: { DRDY }
[ 9430.298191] ata4: hard resetting link
[ 9430.566053] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9430.611304] ata4.00: configured for UDMA/33
[ 9430.615333] ata4: EH complete
[ 9463.075163] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9463.075180] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9463.075191] ata4.00: failed command: DATA SET MANAGEMENT
[ 9463.075196] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 21 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9463.075213] ata4.00: status: { DRDY }
[ 9463.075221] ata4: hard resetting link
[ 9463.347093] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9463.392330] ata4.00: configured for UDMA/33
[ 9463.396295] ata4: EH complete
[ 9493.792140] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9493.792159] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9493.792168] ata4.00: failed command: DATA SET MANAGEMENT
[ 9493.792172] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 2 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9493.792189] ata4.00: status: { DRDY }
[ 9493.792199] ata4: hard resetting link
[ 9494.060089] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9494.105357] ata4.00: configured for UDMA/33
[ 9494.109254] ata4: EH complete
[ 9524.513378] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9524.513396] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9524.513405] ata4.00: failed command: DATA SET MANAGEMENT
[ 9524.513410] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 8 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9524.513426] ata4.00: status: { DRDY }
[ 9524.513436] ata4: hard resetting link
[ 9524.781401] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9524.826575] ata4.00: configured for UDMA/33
[ 9524.830548] ata4: EH complete
[ 9555.244190] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9555.244210] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9555.244222] ata4.00: failed command: DATA SET MANAGEMENT
[ 9555.244230] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 7 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9555.244249] ata4.00: status: { DRDY }
[ 9555.244261] ata4: hard resetting link
[ 9555.516148] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9555.561377] ata4.00: configured for UDMA/33
[ 9555.565282] ata4: EH complete
[ 9588.002961] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9588.002979] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9588.002990] ata4.00: failed command: DATA SET MANAGEMENT
[ 9588.002995] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 26 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9588.003011] ata4.00: status: { DRDY }
[ 9588.003020] ata4: hard resetting link
[ 9588.275011] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9588.320186] ata4.00: configured for UDMA/33
[ 9588.324184] ata4: EH complete
[ 9618.725504] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9618.725521] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9618.725532] ata4.00: failed command: DATA SET MANAGEMENT
[ 9618.725537] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 26 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9618.725553] ata4.00: status: { DRDY }
[ 9618.725562] ata4: hard resetting link
[ 9618.993461] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9619.038702] ata4.00: configured for UDMA/33
[ 9619.042614] ata4: EH complete
[ 9649.443752] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9649.443770] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9649.443782] ata4.00: failed command: DATA SET MANAGEMENT
[ 9649.443786] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 28 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9649.443802] ata4.00: status: { DRDY }
[ 9649.443811] ata4: hard resetting link
[ 9649.711822] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9649.757073] ata4.00: configured for UDMA/33
[ 9649.761031] ata4: EH complete
[ 9680.173935] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9680.173946] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9680.173951] ata4.00: failed command: DATA SET MANAGEMENT
[ 9680.173953] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 21 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9680.173960] ata4.00: status: { DRDY }
[ 9680.173964] ata4: hard resetting link
[ 9680.449861] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9680.495065] ata4.00: configured for UDMA/33
[ 9680.498997] ata4: EH complete
[ 9710.888080] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9710.888098] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9710.888107] ata4.00: failed command: READ DMA
[ 9710.888111] ata4.00: cmd c8/00:08:e8:ba:00/00:00:00:00:00/e2 tag 6 dma 4096 in
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9710.888128] ata4.00: status: { DRDY }
[ 9710.888138] ata4: hard resetting link
[ 9711.156015] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9711.201259] ata4.00: configured for UDMA/33
[ 9711.205283] sd 3:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=30s
[ 9711.205297] sd 3:0:0:0: [sda] tag#6 Sense Key : Aborted Command [current] 
[ 9711.205302] sd 3:0:0:0: [sda] tag#6 Add. Sense: No additional sense information
[ 9711.205308] sd 3:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 02 00 ba e8 00 00 08 00
[ 9711.205312] I/O error, dev sda, sector 33602280 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 9711.205349] ata4: EH complete
[ 9741.613999] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9741.614017] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9741.614026] ata4.00: failed command: DATA SET MANAGEMENT
[ 9741.614031] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 10 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9741.614047] ata4.00: status: { DRDY }
[ 9741.614057] ata4: hard resetting link
[ 9741.881992] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9741.927287] ata4.00: configured for UDMA/33
[ 9741.931201] ata4: EH complete
[ 9772.335877] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9772.335897] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9772.335908] ata4.00: failed command: DATA SET MANAGEMENT
[ 9772.335913] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 19 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9772.335929] ata4.00: status: { DRDY }
[ 9772.335938] ata4: hard resetting link
[ 9772.603874] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9772.649119] ata4.00: configured for UDMA/33
[ 9772.653139] ata4: EH complete
[ 9803.057688] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9803.057705] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9803.057714] ata4.00: failed command: DATA SET MANAGEMENT
[ 9803.057718] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9803.057734] ata4.00: status: { DRDY }
[ 9803.057745] ata4: hard resetting link
[ 9803.325615] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9803.370870] ata4.00: configured for UDMA/33
[ 9803.374788] ata4: EH complete
[ 9833.779415] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9833.779433] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9833.779442] ata4.00: failed command: DATA SET MANAGEMENT
[ 9833.779447] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 8 dma 512 out
                        res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9833.779463] ata4.00: status: { DRDY }
[ 9833.779473] ata4: hard resetting link
[ 9834.047416] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9834.092660] ata4.00: configured for UDMA/33
[ 9834.096558] ata4: EH complete
[ 9870.645353] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9870.645367] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9870.645376] ata4.00: failed command: DATA SET MANAGEMENT
[ 9870.645387] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 15 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9870.645398] ata4.00: status: { DRDY }
[ 9870.645406] ata4: hard resetting link
[ 9870.917481] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9870.962723] ata4.00: configured for UDMA/33
[ 9870.966635] ata4: EH complete
[ 9901.371036] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9901.371053] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9901.371064] ata4.00: failed command: DATA SET MANAGEMENT
[ 9901.371068] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 21 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9901.371085] ata4.00: status: { DRDY }
[ 9901.371094] ata4: hard resetting link
[ 9901.639031] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9901.684285] ata4.00: configured for UDMA/33
[ 9901.688310] ata4: EH complete
[ 9932.080590] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9932.080608] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9932.080618] ata4.00: failed command: DATA SET MANAGEMENT
[ 9932.080623] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 12 dma 512 out
                        res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9932.080639] ata4.00: status: { DRDY }
[ 9932.080650] ata4: hard resetting link
[ 9932.348593] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9932.393843] ata4.00: configured for UDMA/33
[ 9932.397754] ata4: EH complete
[ 9964.854218] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9964.854237] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9964.854249] ata4.00: failed command: DATA SET MANAGEMENT
[ 9964.854254] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 27 dma 512 out
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9964.854270] ata4.00: status: { DRDY }
[ 9964.854279] ata4: hard resetting link
[ 9965.122215] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9965.167470] ata4.00: configured for UDMA/33
[ 9965.171436] ata4: EH complete
[ 9997.635788] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0xd0000 action 0x6 frozen
[ 9997.635805] ata4: SError: { PHYRdyChg CommWake 10B8B }
[ 9997.635814] ata4.00: failed command: DATA SET MANAGEMENT
[ 9997.635818] ata4.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 9997.635834] ata4.00: status: { DRDY }
[ 9997.635845] ata4: hard resetting link
[ 9997.903855] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9997.949146] ata4.00: configured for UDMA/33
[ 9997.953119] ata4: EH complete

J'ai trouvé ce fil (et pour l'instant ça a l'air de marcher, donc à confirmer encore, mais je laisse ça là pour référence et confirmerai ou non)
https://bbs.archlinux.org/viewtopic.php?id=136907

Tu as mis à jour le firmware du SSD ?

EDIT: Firmware upgrade on hard drive resolve issue.

Nah j'ai juste mis pcie_aspm=off dans l'option grub ; j'ai pas encore eu le souci mais le pb étant aléatoire, pas dit que ce soit ça (faut bien attendre une semaine).

Ah ben c'est revenu, du coup en effet, faudrait tenter de mettre à jour le firmware {je sais pas comment faire faudra trouver

}.
EDIT : j'ai trouvé un utilitaire pour windows quoi.

J'ai regardé sur le site de crucial et il n'y a pas de mise à jour disponible pour ce modèle : https://www.crucial.fr/support/ssd-supp ... 00-support

Dans le doute je vais tester leur boîte noire "Utilitaire d'optimisation et de mise à jour"

EDIT : je confirme, t'as raison, ils proposent rien... Zut.

J'ai eu le même souci avec un SSD sur mon ordi portable.
J'ai changé dans le BIOS le seul paramètre disponible pour le disque (Combined/Ehanced) et depuis je n'ai plus d'erreur.

J'ai posté trop vite. Les erreurs sont toujours la.
Je teste le disque pour voir s'il n'y a pas de bad blocks et installation d'une distribution pour voir si les erreurs reviennent

Bon après plein d'essais, je peux dire que mon portable ne veut pas de ce disque.
Avec d'autres ordinateurs, ça fonctionne.
Mystère.
Mon contrôleur SATA qui est trop ancien ?

Moi j'ai l'impression que ça ne survient plus mais j'ai rien changé depuis, c'est flippant

Libre à Quimperlé

Freeze sur les SSDs de l'asso

Freeze sur les SSDs de l'asso

Re: Freeze sur les SSDs de l'asso

Re: Freeze sur les SSDs de l'asso

Re: Freeze sur les SSDs de l'asso

Re: Freeze sur les SSDs de l'asso

Re: Freeze sur les SSDs de l'asso

Re: Freeze sur les SSDs de l'asso

Re: Freeze sur les SSDs de l'asso

Re: Freeze sur les SSDs de l'asso

Re: Freeze sur les SSDs de l'asso